Biomedical Equipment Service for Clinical Labs
Centrifuge PM and verification, refrigerator and freezer temperature validation, incubator and analyzer safety testing — PBES helps clinical, research, and reference labs keep instruments verified and documented.
Equipment we service
What's on our trucks & schedules.
- Centrifuges (benchtop, refrigerated, high-speed)
- Lab refrigerators & freezers (2–8°C, -20°C, -80°C)
- Incubators & water baths
- Point-of-care and benchtop analyzers
- Biosafety cabinets (electrical safety)
- Microscopes & pipettes (support)
- Autoclaves
- AEDs
Why clinical & reference labs call PBES
The drivers behind the call.
- CAP / CLIA equipment documentation
- Centrifuge RPM verification & imbalance service
- Refrigerator/freezer temperature logging & alarm testing
- Traceable service history per instrument
Services delivered to clinical & reference labs
Every PBES service, tuned to your setting.
On-site repair for Florida clinics, ASCs, and practices.
Annual ESI documentation for patient-care devices.
Per-outlet receptacle testing and documentation for patient-care areas.
Annual NFPA 80 fire and smoke door assembly inspections, per door.
Manufacturer-aligned PM to reduce downtime.
Measured calibration checks and performance verification, documented per device.
Sterilizer service, leaks, cycle failures, gaskets.
Artifacts, lead errors, printer and acquisition issues.
NIBP, SpO2, ECG, display and battery service.
Spot-check monitors: NIBP, SpO2, temperature.
Energy output, self-tests, pads, batteries.
Pads, batteries, self-tests, readiness records.
Temperature verification, probes, alarms.
RPM verification, imbalance, timer, lid latch.
Lifts, controls, motors, stability.
Height, tilt, Trendelenburg, hand controls, hydraulics.
Occlusion, air-in-line, flow verification, batteries.
Image quality, probes, monitor, control panel.
Output verification, return-pad monitoring, PM records.
Inventory, service history, PM and repair visibility.
FAQ · Clinical & Reference Labs
Common questions.
Do you verify centrifuge RPM?
Yes. PBES performs RPM verification, imbalance and lid-latch testing, timer verification, and PM on common lab centrifuges — with results documented in TESSA.
Can you support CAP inspection documentation?
Every PBES service visit produces standardized documentation traceable per instrument — the format CAP and CLIA inspectors expect.
Do you service ultra-low freezers?
PBES supports temperature verification, probe checks, and alarm testing on -20°C and -80°C units. Compressor and refrigeration repair scope depends on model and parts availability.
Talk to PBES